Water resistant coating Qatar

Let your products or processes benefit from water resistant coating

Water resistance is a characteristic expected of many consumer goods, from electronics to shoes and fabrics. It is also required from industrial machinery; for it prevents water from entering the structures and causing short circuits. A water resistant coating is the most common solution to improve or create water resistance in industrial and architectural projects. Water resistant coatings form a barrier between the substrate and the potential water-related hazards in its environment; depending on the water resistant treatment, the barrier can be impermeable to both water and water vapour. The water resistant paints are of high relevance in Singapore, due to the high humidity and presence of water.

In this article we will introduce the most common confusion causes related to water resistant coating and outline the different types of water resistant treatments available in Qatar as well as helping you choose the most suitable option for your project.

Before choosing a water resistant coating, consider this:

1. Standards: Water resistant coating for electronics, fabrics and other consumer goods is not regulated by any specific standard in Qatar. Water resistance is not required and usually not measured. However, the water resistance of electronics is measured by IP rating (Ingress Protection).
2. Warranty: When it comes to architectural water resistant coatings, rely on a professional, certified contractor whose work quality is guaranteed by a warranty and certification. Water resistant masonry paint, for example, is usually given a 7 year guarantee when applied correctly.
3. Product names: The product names may be confusing – make sure you read the fine print and check whether waterproof and water resistant mean what they say.

A closer look into water resistant coating product names

Though the terms ‘water resistant’, ‘water repellent’ and ‘waterproof’ are often used as synonyms, they actually describe different degrees of water resistance. Water resistant coatings can be classified by the the level of protection from water as follows:

• Water resistant: Usually the lowest degree of water resistance. Able to resist water penetration to a certain extent, but not entirely – in most cases a ‘water resistant’ product cannot be completely submerged without problems. ‘Water resistant’ is also the general term for water protective coatings.
• Water repellent: Higher resistance than ‘water resistant’, yet also not completely impermeable to water. Often refers to nano- or fluoropolymer coatings which literally repel water.
• Waterproof: An almost 100% watertight solution,  water can not penetrate these coating systems.

Despite the difference between waterproof and water resistant, consumer products may still be called waterproof when they are only resistant, and vice versa. But these are descriptions that can apply to more than just coating. When choosing a coating, you should always check the manufacturer’s  data sheets and instructions.

Choose the most suitable of the 4 types of water resistant coating

Waterproofing products are as various as waterproofing projects. However, not every water resistant paint suits all situations; like with all coating projects, you need to take into consideration the intended substrate, use, and environment of the coating, as well as the required degree of water resistance. For example, a water resistant paint for fabric needs to be invisible, electronics require thin films, and steel requires an impermeable barrier to protect from corrosion. On the other hand, a waterproof wall paint never is 100% watertight, due to the fact that it needs to remain breathable. Here are four of the most common water resistant coating solutions:

1. Surface pre-treatment

Characteristics: Corrosion resistance, limited water resistance.
Description: The treatment of a metal surface with another metal in processes like galvanisation and anodisation is seen as an effective corrosion protection method in certain environments. These processes also provide water resistance, to a certain extent, by covering the original metal substrate. However, this is often not sufficient, so to conform to tougher waterproofing requirements it is topped with a resin or fluoropolymer coating.
Examples of uses: Steel structures and products, in tougher environments as pretreatment with a further topcoat.

2. Fluoropolymers

Water resistant coating makes machinery watertight.

Characteristics: Insulating, impermeable to gases and water, resistant to chemicals, UV radiation, contamination and chalking as well as anti corrosion. Usually applied as a thick film, which makes the, unsuitable for applications that do not allow changes in weight and size.
Description: Fluoropolymer coatings are known for their low coefficient of friction and use as lubricants. The most common of these are FEP and PTFE coatings such as Teflon which are almost impermeable to water. Fluoropolymers are also the most common type of Durable Water Repellent (DWR) coatings which are applied to fabrics as waterproof yet breathable coatings.
Examples of uses: Consumer goods, industrial machinery (due to chemical resistance), automotive parts, insulation of wiring, fabrics.

3. Nanotechnology

Characteristics: Thin and invisible coating. Due to poor abrasion resistance, they require frequent reapplication.
Description: The most innovative water resistant paints and coatings are based on nanotechnology, and do not just coat a substrate but actually bond with it, forming a layer that is no longer separate. The use of these coatings, especially in waterproofing industrial structures, is increasing and the technology keeps developing. Nanotechnology coatings also exist as water resistant spray treatments that are available for consumers to apply at home.
Examples of uses: Touchscreens and displays, small surfaces at home (e.g. windows and shower cubicles), protecting wooden floors from water and securing circuit board safety.

4. 2K resin solutions

Characteristics: Extremely durable, impact and abrasion resistant, watertight, chemical resistant and many more beneficial properties depending on the type of resin coating. Usually a high solids coating that adds to the weight and size of the coated object.
Description: Two component resin coatings such as polyurethanes and epoxies belong to the most durable water resistant coatings group. Such a coating is almost always a good idea, and there are many different types which can be further modified to meet specific requirements.
Examples of uses: Pools, vertical and horizontal architectural structures (from bathrooms to offshore wind turbines), cargo and storage tanks, machinery and automotive parts.