Extreme protection with chemical resistant coating
Almost all coatings will be exposed to chemicals and acids at some point, whether cleaning products, spills, or fumes. However most of these are mild, and the coating does not need a special formulation. Chemical resistant coating or acid resistant paint is designed to provide protection from the harshest of substances. They need to perform safely and consistently under punishing conditions, and so need to be highly resistant. Without proper protective coating, solvents, acids, alkalis, salts, and other substances can be absorbed by the substrate, causing deterioration and contamination.
The right chemical resistant coating is the one that satisfies the requirements of the chemical, as well as the needs of the substrate. Choosing correctly requires fully understanding both. In this article we will explain the different chemical resistant coating options, and provide a guide to help you choose the right one as well as where to find products and contractors in Qatar.
5 factors that tell you which chemical resistant coating you need
Substrates and environments which demand heavy duty protection from chemicals include flooring, storage and cargo tanks, treatment plants, laboratories, cooling towers, pipelines, bunds, underground metal and concrete structures, factories, machinery and equipment, just to name a few.
The range of substrates, environments, and chemicals is matched by the range of chemical resistant coatings. To choose the right chemical resistant coating you need to be aware of:
- The type of chemical(s) – each coating has different strengths, and may provide protection from one chemical but not another.
- The concentration of the chemical(s) – the strength of the chemical will obviously affect the coating’s resistance.
- The degree of exposure to the chemical(s) – will the substrate be immersed, or is it just contact exposure?
- The duration of the exposure – how long will the coating need to withstand the chemical?
- The temperature of the chemical(s) – a heated chemical adds an extra factor for the coating to deal with.
The types of chemical resistant paint to choose from
Chemical resistant coatings are available in a wide range of formulations, suited to different applications. The most common types are polyurethane, epoxy, phenolic, and fluoropolymers. The choice of coating is further complicated by extra requirements such as high abrasion resistance, or sufficient lack of friction.
- FLUOROPOLYMER – non-stick, high temperature (300°C) chemical resistant coatings: wide range of chemicals, including concentrated sulfuric, nitric, hydrochloric and phosphoric acids
Uses: Normally used where a low coefficient of friction or a lubricious surface is required. Suitable for use on concrete or metal in secondary containment linings, acid plants, fertilizer plants, oil refineries, and more.
Cons: Fluoropolymers have poor weather protection characteristics, and cannot withstand acetone, esters, ketones, and acetic acid.
- EPOXY – protection against acids, alkalis, solvents, caustic fluids, fuels, fatty acids, salt or sugar solutions, chemical cleaning detergents and more.
Uses: An unprotected concrete floor can quickly deteriorate through exposure to chemicals, particularly flooring in the food and drink industry, garages, factories, and plants. Having a floor that can withstand these exposures is important to prevent bacterial contamination. Epoxy coating is suitable for metals, concrete and wood.
Cons: The drawback with epoxy coatings is a tendency to weaken with high or fluctuating temperatures, and it is not as flexible as polyurethane. They are also not good with UV radiation (which causes it to chalk and fade), and can be stained by chemical attack.
- POLYURETHANE – resistant to organic caustic fluids, acids and alkalis, fuel and hydraulic oils, and solvents
Uses: Where greater flexibility and an ability to deal with high temperatures is needed, polyurethane is the traditional alternative to epoxy. Polyurethane is also the preferred choice in the dairy industry where there is exposure to lactic acids.
Cons: Softer than epoxy coatings, polyurethanes are more likely to abrade. Extremely sensitive to humidity at application. Less resistant than epoxies.
- PHENOLIC – resist 98% sulfuric acid, hydrochloric acid, transmission fluid, gasoline, formaldehyde, phenol, and numerous other chemicals also in high temperatures
Uses: Protective coating for tanks, ducts, piping, immersion service for most acids, solvents, and salts (chemical storage). Applicable for flooring in healthcare, science, technology and electronics industries, as well as chemical and waste treatment plants, pulp and paper mills, and power generation plants.
Cons: Not recommended for exposure to some strong organic acids and solvents, and the less epoxy used in the makeup of the coating, the less resistant to chemicals it is.
Find chemical resistant coating products, suppliers and contractors in Qatar
With so many different environments and surfaces that require chemical resistant coatings, it is no surprise that the range of products and services is extensive. There are the coatings above, but there are also specially formulated coatings like methacrylate, which cures at low temperatures and is used for cold-store and freezer rooms. Below is a table outlining some of the available products, with price indications (subject to change and variation). It is these coatings from reputable coatings manufacturers like AkzoNobel that contractors trust.
A chemical resistant coating (or acid proof paint) should be applied by a trained professional to ensure an effective and flawless application. Fortunately there are many coating installer companies operating in Qatar. If you have a project that needs chemical resistant coating, our experts are here to help! In cooperation with our partners we can provide you with a tailor-made quote, and connect you with the right coating solution. Just get in touch via email or the request a quote- button at the bottom of this article.
|Chemical resistant coating type||Chemical resistant coating product||Product suitability||Price indication|
|Two component epoxy||Jotun Jotafloor Topcoat||Ideal for industrial floors, laboratories, hospitals, food and beverage plants, kitchens, warehouses, factories, and manufacturing facilities.||QAR310/5L at 10m² per liter|
|Two component epoxy phenolic||International Interline 850||Tank and pipe lining for steel storage tanks and pipes containing a range of products including crude oil, gasoline, caustic solutions, potable water, and solvents.||QAR3.400/20L at 6m² per liter|
|Two component epoxy novolac||Sherwin-Williams Nova-Plate 325||For use on steel and masonry surfaces in industrial and marine environments such as oil storage tanks, secondary containment, ethanol storage tanks, and more.||QAR1.170/5L at 2m² per liter|
|Two component novolac vinyl ester||International Interline 955||Reinforced with glass flake to increase chemical and abrasion resistance. Intended for use in internal lining of chemical storage tanks and vessels for hot media (up to 90°C) or acids.||QAR4.000/20L at 2m² per liter|